Pressing Instructions

Follow these simple steps for the best DTF transfer results.

1

Set Your Heat Press

260°F–310°F Depending on Fabric Set your heat press between 260°F and 310°F depending on the fabric type. Use high pressure and make sure your press is properly calibrated.

2

Prepare the Garment

Make sure the garment is clean, dry, and lint-free before applying the transfer. Pre-press briefly if needed to remove moisture and wrinkles.

3

Press the Transfer

15 Seconds Place the transfer on the garment and press for 15 seconds using high pressure .

4

Hot Peel Immediately

HOT PEEL Peel the film immediately while hot . Pull the film sideways in one smooth motion .

5

Final Press

5 Seconds For extra durability, cover the design with a protective sheet and press again for 5 seconds . Optional

Important: Recommended pressing temperature is 260°F–310°F depending on the fabric. Lower temperatures may be better for heat-sensitive materials, while some cotton and cotton-blend fabrics can tolerate higher temperatures. Always test on the actual fabric before production. Heat presses vary, so verify the actual temperature and use consistent pressure. Follow the garment care label and the transfer's compatibility requirements.